As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.
Electronic-drum modules commonly use a 1/4-inch stereo headphone output, while many wired headphones use a 3.5 mm plug plus an adapter. Closed-back designs can reduce the acoustic pad and pedal noise reaching the ear, but the module’s manual—not a generic impedance rule—decides compatibility. These nine wired choices span drum-specific isolation and studio monitoring; set the module low first and take breaks rather than trying to overpower the kit with volume.
| # | Product | Price | Where to buy |
|---|---|---|---|
| 1 | Roland RH-300V V-Drums Headphones | $150–$200 | Amazon · eBay |
| 2 | Roland RH-5 Headphones | $35–$50 | Amazon · eBay |
| 3 | Vic Firth SIH2 Stereo Isolation Headphones | $65–$90 | Amazon · eBay |
| 4 | Audio-Technica ATH-M20x | $45–$65 | Amazon · eBay |
| 5 | Audio-Technica ATH-M40x | $95–$120 | Amazon · eBay |
| 6 | Sennheiser HD 280 Pro | $85–$110 | Amazon · eBay |
| 7 | beyerdynamic DT 770 PRO 80 ohm | $160–$190 | Amazon · eBay |
| 8 | Sony MDR-7506 | $85–$115 | Amazon · eBay |
| 9 | Shure SRH440A | $95–$120 | Amazon · eBay |
The picks, in detail
Roland RH-300V V-Drums Headphones
Closed 32-ohm V-Drums model with 50 mm drivers, a 2.5 m straight cable and a 3.5 mm plug plus 1/4-inch adapter.
- 32 ohm impedance
- closed dynamic design
- 2.5 m straight cable
- 3.5 mm plug and 1/4 in adapter
- drum-specific model
- adapter included
- fixed cable
- check headband comfort personally
Roland RH-5 Headphones
Budget closed-back 32-ohm option with 40 mm drivers, 3 m cable and included mini-to-1/4-inch adapter.
- 32 ohm impedance
- closed dynamic design
- 3 m cable
- 3.5 mm plug with 1/4 in adapter
- long cable
- lower-cost Roland option
- fixed cable
- lighter 40 mm driver
Vic Firth SIH2 Stereo Isolation Headphones
Drummer-oriented wired isolation headphones with a 3.5 mm stereo jack and 3.5-to-6.3 mm adapter.
- wired over-ear design
- 3.5 mm stereo jack
- 6.3 mm adapter
- drum hearing-protection format
- module-ready adapter
- purpose-built drummer format
- impedance is not published in the cited listing
- fixed cable
Audio-Technica ATH-M20x
Closed-back wired monitor headphones with a 3 m left-side cable; use the included or separate adapter required by the module output.
- closed-back design
- 3 m straight cable
- wired monitoring format
- left-side cable exit
- long cable for seated kits
- budget monitor category
- verify impedance and connector in current regional spec
- comfort is personal
Audio-Technica ATH-M40x
Closed-back wired monitor headphones with detachable cables; check the regional package for its 3.5 mm plug and 1/4-inch adapter.
- closed-back design
- detachable cable system
- wired monitoring format
- folding earcups
- replaceable cable
- portable design
- module adapter package can vary
- confirm impedance in product spec
Sennheiser HD 280 Pro
Wired closed-back monitoring headphones with a coiled cable and 3.5 mm plug/6.3 mm adapter format for a module headphone socket.
- closed-back design
- coiled cable
- 3.5 mm plug
- 6.3 mm adapter
- coiled cable suits seated movement
- common studio-monitor format
- confirm current impedance revision
- clamp comfort varies
beyerdynamic DT 770 PRO 80 ohm
Closed-back wired monitoring option with the 80-ohm version, 3 m cable and 3.5 mm plug plus 6.35 mm adapter; check that the module can provide adequate level.
- 80 ohm impedance version
- closed-back design
- 3 m cable
- 3.5 mm plug and 6.35 mm adapter
- published impedance choice
- long cable
- some modules may play quieter than 32-ohm sets
- fixed cable on classic version
Sony MDR-7506
Wired closed-back monitor headphones with a coiled cable, 3.5 mm plug and 6.3 mm adapter for modules that provide a standard stereo headphone output.
- closed-back design
- coiled cable
- 3.5 mm plug
- 6.3 mm adapter
- compact folding design
- common wired monitoring format
- confirm current impedance specification
- cable is not detachable
Shure SRH440A
Closed-back wired studio headphones with detachable cable and a 3.5 mm connection/6.3 mm adapter arrangement for module use.
- closed-back design
- detachable cable
- 3.5 mm connection
- 6.3 mm adapter
- replaceable cable
- folding studio format
- check exact impedance in current spec
- not drum-specific
Buying tips
- Check the module’s PHONES jack size and manual first. A 6.3 mm output normally needs the supplied or a quality 3.5-to-6.3 mm stereo adapter; do not use a mono instrument adapter.
- Impedance is not a sound-quality score. A higher-impedance headphone may need more output level than a low-impedance one, so test at a low level with your own module.
- Start with the module volume down, raise it only to a comfortable level, and take regular quiet breaks. If you cannot hear safely at a moderate setting, review fit, isolation and the room rather than continuously increasing volume.
As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.