As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.
Reconing a subwoofer isn’t a one-glue job — the spider-to-basket bond, the surround-to-frame bond, and the voice-coil connections each want a different adhesive chemistry. These six products cover the actual joints in a recone: flexible CA for high-stress connections, rubber contact cement for surrounds, and epoxy for the dust cap and coil.
| # | Product | Price | Where to buy |
|---|---|---|---|
| 1 | FixMySpeaker 1oz Full Adhesive Kit (CA + Rubber) | $18-$20 | Amazon |
| 2 | Big Jeff Audio Subwoofer Recone Kit | $35-$40 | Amazon |
| 3 | Simply Speakers MI-1500 Speaker Repair Epoxy | $9-$11 | Amazon |
| 4 | Bob Smith Industries Maxi-Cure CA Glue | $14-$16 | Amazon · eBay |
| 5 | E6000 Industrial Strength Adhesive | $4-$6 per tube | Amazon · eBay |
| 6 | Gorilla Super Glue Gel | $7-$9 | Amazon · eBay |
The picks, in detail
FixMySpeaker 1oz Full Adhesive Kit (CA + Rubber)
A recone-specific kit pairing a black rubberized CA glue for spider-to-coil, spider-to-frame, and cone-to-coil bonds with a separate rubber contact adhesive for surrounds and dust caps — the two chemistries a full recone actually needs, in one order.
- 1oz CA adhesive + spray activator
- 1oz rubber contact adhesive
- Enough for 1-2 ten- or twelve-inch subs
- Covers both high-stress and flexible-joint bonds
- Spray activator cures the CA in seconds
- Rubber adhesive isn’t rated for voice-coil connections
- Small bottles for a multi-sub project
Big Jeff Audio Subwoofer Recone Kit
A recone kit built around a flexible CA glue plus E6000 industrial adhesive — E6000’s waterproof, heat-resistant bond suits the surround while the CA handles the tighter, stress-loaded joints.
- 1oz flexible CA glue
- 2oz CA accelerator spray
- 1oz E6000 industrial adhesive
- E6000 is a proven surround adhesive with real flex
- Accelerator speeds up the CA cure dramatically
- E6000 has a strong odor and needs ventilation
- Not epoxy, so not ideal for the dust cap/coil joint
Simply Speakers MI-1500 Speaker Repair Epoxy
A dedicated two-part epoxy for the dust cap, voice coil, and cone joints — the connections that take the most heat and stress and are the ones CA glue and contact cement aren’t built for.
- Two-part epoxy formula
- Purpose-built for voice coil/cone/dust cap bonds
- Small tube sized for spot repairs
- Right chemistry for the highest-stress joints in a recone
- Cheapest single item on this list
- Not a full-recone kit on its own — pair it with a CA/surround glue
- Slower cure than CA
Bob Smith Industries Maxi-Cure CA Glue
A thick, gap-filling cyanoacrylate long used in the hobby/RC world for exactly this kind of stress-loaded bonding — a solid alternative CA for spider and cone joints if you’d rather buy a bigger bottle than the small recone-kit vials.
- Extra-thick, gap-filling CA formula
- 2oz bottle — larger than most recone-kit CA vials
- Fast-curing with accelerator
- More glue per bottle than dedicated recone kits
- Trusted, widely-stocked hobbyist brand
- Not marketed for speakers specifically, so no surround/epoxy options in the same line
- Needs a separate accelerator for a fast cure
E6000 Industrial Strength Adhesive
The standalone tube version of the surround adhesive bundled into several recone kits — flexible, waterproof, and the most commonly recommended glue for reattaching a rubber or foam surround to the basket.
- Waterproof, flexible cure
- Dries semi-clear
- Sold in small precision-tip tubes
- Cheapest way to buy just the surround adhesive
- Flexes with the surround instead of cracking
- Slow full cure (24+ hours)
- Not suited to voice coil or high-stress joints
Gorilla Super Glue Gel
A thick, non-drip CA gel some DIY reconers use on the spider, frame, and dust cap joints as a cheaper, hardware-store-shelf alternative to specialty recone glue — fine for a one-off repair, not what shops use for volume work.
- Gel formula resists dripping/running
- Fast set (10-45 seconds)
- Widely available at any hardware store
- Cheap and easy to find locally
- No mail-order wait for a same-day fix
- Not formulated for speaker vibration/flex like purpose-built recone glue
- Less flexible long-term than E6000 on a surround
Buying tips
- Match the glue to the joint: CA (cyanoacrylate) for the spider and stress-loaded connections, a flexible rubber/E6000-type adhesive for the surround, and epoxy for the dust cap and voice coil.
- Clean the basket and frame with acetone and lightly sand away old glue residue before rebonding — new adhesive over old glue film is the most common cause of a recone failing early.
- A CA accelerator spray isn’t optional for anything beyond a single spot fix — without it you’re holding parts in alignment for minutes instead of seconds.
As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.