Best Amp For 2 Kicker Comp Vr 12

Illustration for amp for 2 kicker comp vr 12
Illustration

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

The current Kicker 52CVR122 is a 12-inch dual-2-ohm CompVR rated for 225–450 watts RMS per driver, so two need 450–900 watts RMS total. With two dual-2-ohm drivers, the common usable final system loads are 0.5, 2 or 8 ohms; 2 ohms is the practical target for the amp choices below. This is an amplifier comparison, not a wiring diagram: have a qualified installer select the coil configuration, protect the vehicle’s electrical system and set gain with a proper test method. Do not match by peak watts. The literal 900-watt target is narrow, so the list includes 1,000–1,200 W RMS at 2 ohms; those higher-rated amps need conservative gain setting to leave safe headroom rather than deliver their full rating continuously.

# Product Price Where to buy
1 JL Audio JD1000/1 $429.99 Amazon · eBay
2 JL Audio RD1000/1 $479.99 Amazon · eBay
3 Kenwood eXcelon XR1001-1 $699 Amazon · eBay
4 JBL Club A1000 $449.95 Amazon · eBay
5 Rockford Fosgate Power T1000-1bdCP $659.99 Amazon · eBay
6 Hertz SP 1.900 $439.99 Amazon · eBay
7 JBL Marine A1000 $549.95 Amazon · eBay
8 JL Audio MV1000/1 $1,249.99 Amazon · eBay
9 Alpine S2-A120M $549.95 Amazon · eBay
10 Kicker 46CXA1200.1T $400–$500 Amazon · eBay

The picks, in detail

JL Audio JD1000/1
Pick 01 of 10

JL Audio JD1000/1

The JD1000/1 is a direct power-tier match in a 2-ohm final-load system: it is rated 1,000 W RMS mono at 2 ohms, just above the two-CompVR 900 W RMS combined maximum.

  • mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 600 W RMS × 1 at 4 ohms
Pros

  • close to the pair’s combined RMS ceiling
  • 2-ohm rated output is published
Cons

  • gain setup is still essential
  • not a 0.5-ohm solution
JL Audio RD1000/1
Pick 02 of 10

JL Audio RD1000/1

JL Audio’s RD1000/1 also delivers 1,000 W RMS at 2 ohms, giving a dual-CompVR system a modest rated-power margin when configured for a 2-ohm final load.

  • mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 600 W RMS × 1 at 4 ohms
Pros

  • published 2-ohm rating
  • clip indicator aids careful setup
Cons

  • above 900 W combined target
  • requires a compatible 2-ohm configuration
Kenwood eXcelon XR1001-1
Pick 03 of 10

Kenwood eXcelon XR1001-1

The XR1001-1 is a 2-ohm-stable mono amp rated at 1,000 W RMS at 2 ohms and 500 W RMS at 4 ohms, making its relevant rating clear for this two-driver application.

  • mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 500 W RMS × 1 at 4 ohms
Pros

  • CTA-2006-compliant rating
  • speaker-level inputs
Cons

  • backorder status at observed retailer
  • slightly above the pair’s 900 W maximum
JBL Club A1000
Pick 04 of 10

JBL Club A1000

JBL’s Club A1000 is a compact mono Class D option rated at 1,000 W RMS into 2 ohms, with 600 W RMS at 4 ohms. It belongs in the 2-ohm final-load group, not in a 1-ohm plan for these drivers.

  • mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 600 W RMS × 1 at 4 ohms
Pros

  • close power-tier fit
  • variable crossover and bass boost
Cons

  • more rated power than 900 W
  • not 1-ohm stable
Rockford Fosgate Power T1000-1bdCP
Pick 05 of 10

Rockford Fosgate Power T1000-1bdCP

Rockford Fosgate rates the T1000-1bdCP at 1,000 W RMS at 2 ohms, as well as at 1 ohm, so the correct comparison point for the two 52CVR122 drivers remains its 2-ohm rating.

  • mono Class BD amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 700 W RMS × 1 at 4 ohms
Pros

  • constant 1,000 W RMS rating across listed low loads
  • CTA-2006 compliant
Cons

  • premium price
  • rated output exceeds the pair’s 900 W maximum
Hertz SP 1.900
Pick 06 of 10

Hertz SP 1.900

The compact Hertz SP 1.900 is specified at 1,000 W RMS mono at 2 ohms. Its small chassis can help where installation space is limited, while its 2-ohm RMS rating remains the relevant number.

  • mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • IP55 aluminum chassis
Pros

  • compact chassis
  • published 2-ohm RMS rating
Cons

  • more rated power than 900 W
  • installation still needs adequate current capacity
JBL Marine A1000
Pick 07 of 10

JBL Marine A1000

For a boat or powersports installation needing environmental protection, JBL’s Marine A1000 is a mono amp rated for 1,000 W RMS at 2 ohms. It is a purpose-specific alternative, not the value choice for a conventional car.

  • marine mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • 600 W RMS × 1 at 4 ohms
Pros

  • marine-oriented construction
  • 2-ohm output matches the viable final-load plan
Cons

  • higher cost than car-only models
  • still slightly above 900 W total
JL Audio MV1000/1
Pick 08 of 10

JL Audio MV1000/1

JL Audio’s MV1000/1 is another weather-conscious mono alternative, specified at 1,000 W RMS at 2 ohms and 600 W RMS at 4 ohms. It is most sensible where its marine feature set is genuinely needed.

  • marine mono Class D amplifier
  • 1,000 W RMS × 1 at 2 ohms
  • TüN app configuration via USB
Pros

  • published 2-ohm output
  • marine installation focus
Cons

  • very high price for a car installation
  • rated power is above the pair’s maximum
Alpine S2-A120M
Pick 09 of 10

Alpine S2-A120M

Alpine’s S2-A120M produces 1,200 W RMS at 2 ohms, deliberately leaving significant amplifier headroom above a pair of CompVRs. It can be considered only with a carefully limited gain setting and appropriate electrical support.

  • mono Class D amplifier
  • 1,200 W RMS × 1 at 2 ohms
  • 600 W RMS × 1 at 4 ohms
Pros

  • current widely stocked model
  • published 2-ohm specification
Cons

  • substantially above 900 W combined maximum
  • requires conservative setup
Kicker 46CXA1200.1T
Pick 10 of 10

Kicker 46CXA1200.1T

Kicker’s 46CXA1200.1T is rated at 1,200 W RMS at 2 ohms. It is a same-brand headroom option, not a literal 900-watt match; use it only when the gain is set to protect the two 225–450 W RMS drivers.

  • mono subwoofer amplifier
  • 1,200 W RMS × 1 at 2 ohms
  • Kicker CX Series
Pros

  • same-brand option
  • relevant 2-ohm rating is published
Cons

  • too much full-rated output for the pair
  • not a substitute for careful gain setting

Buying tips

  • Use the 52CVR122 RMS rating of 225–450 watts per driver, not its 900-watt peak figure, to select an amplifier.
  • Two dual-2-ohm drivers can present 0.5, 2 or 8 ohms depending on coil configuration; choose an amp rated at the final load.
  • A 2-ohm amp rating around 900 watts is the literal target; 1,000–1,200 W models require conservative gain setup.
  • Have a qualified installer check enclosure, fusing, cable size, charging system capacity and amplifier settings before listening at high level.

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

Latest Posts