As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.
Semi-truck sleeper cabs share the same mounting problem as RVs and campers — constant road vibration on a curved or paneled wall — so the products that actually work here split into two groups: RAM’s modular truck-specific mounting hardware, and the RV/camper full-motion lockable TV mounts truckers also use in a sleeper. Both are covered below.
| # | Product | Price | Where to buy |
|---|---|---|---|
| 1 | RAM Mounts Tough-Claw Clamp Mount System | $25-$50 | Amazon · eBay |
| 2 | RAM No-Drill Universal Mount for Heavy Duty Trucks (Swing Arm) | $400-$470 | Amazon |
| 3 | Mount-It! MI-431 Lockable Camper/RV TV Wall Mount | $45-$60 | Amazon · eBay |
| 4 | PERLESMITH Lockable RV TV Mount | $35-$60 | Amazon · eBay |
| 5 | VideoSecu Adjustable Rotating Swing Arm TV Wall Mount | $20-$35 | Amazon · eBay |
| 6 | VIVO RV TV Mount, Quick Release (VWRV1) | $25-$45 | Amazon · eBay |
The picks, in detail
RAM Mounts Tough-Claw Clamp Mount System
A modular clamp-and-ball base that grabs onto grab handles, roll bars, or rails without drilling — the base of RAM’s mounting ecosystem, paired with a TV/tablet cradle to hold the actual screen.
- Clamps to round, square, or odd-shaped rails 0.625″-1.5″
- No-drill installation
- Modular — pairs with various device cradles
- No drilling into the sleeper wall
- Extremely rugged, designed for vehicle vibration
- Base clamp only — a separate TV cradle/arm is needed to complete a full TV mount
RAM No-Drill Universal Mount for Heavy Duty Trucks (Swing Arm)
Uses the truck’s existing seat-bolt hardware rather than drilling into the cab, with a swing-arm design that extends a mounted device (with a compatible cradle) out from the base for viewing.
- No-drill, uses existing seat bolts
- Swing-arm extension
- Built for heavy-duty truck cabs
- Zero permanent modification to the truck
- Purpose-built for commercial trucking use
- Significantly more expensive than RV-style TV mounts
Mount-It! MI-431 Lockable Camper/RV TV Wall Mount
A full-motion, lockable, quick-release mount rated for 23-43″ TVs, explicitly marketed for campers, trailers, motorhomes, and trucks — one of the more affordable dedicated options.
- Fits 23-43″ TVs, up to 77 lbs
- Full motion, tilt/swivel/extend
- Lockable, quick-release, rust-resistant aluminum
- Locks the TV in place for driving, not just parked
- Rust-resistant build for cab humidity/temperature swings
- Needs a solid mounting surface — sleeper wall panels often need to be opened to reach a structural point
PERLESMITH Lockable RV TV Mount
A comparable full-motion lockable mount for 13-42″ TVs, explicitly listed for camper, trailer, motorhome, and truck use, with an articulating arm that swivels and tilts.
- Fits 13-42″ TVs, up to 77 lbs
- Full motion, articulating arm
- VESA up to 200x200mm
- Wide TV size compatibility
- Locking mechanism secures the screen while driving
- Smaller max VESA pattern than some larger RV mounts
VideoSecu Adjustable Rotating Swing Arm TV Wall Mount
A budget swing-arm mount for 19-32″ (up to 47″ on some models) screens — not sleeper-specific, but commonly used by drivers mounting smaller TVs in tighter cab spaces.
- Fits 19-32″, up to 47″ on some models
- Rotating swing arm
- Adjustable tilt
- Lowest price point in this list
- Compact swing arm suits small sleeper spaces
- No locking mechanism — better suited to a smaller, lighter TV that won’t shift much while driving
VIVO RV TV Mount, Quick Release (VWRV1)
A low-profile, anti-rust plastic-polymer mount for screens up to 43″ and 30 lbs, built specifically for the camping/truck/RV market with a quick-release design for pulling the TV down when not in use.
- Fits up to 43″, 30 lbs
- VESA 100x100mm
- Anti-rust plastic polymer, quick release
- Quick-release lets you stow the TV separately from the mount
- Anti-rust build suits humid/temperature-swinging cabs
- Lower weight capacity than the Mount-It and PERLESMITH options
Buying tips
- Open the sleeper wall panel before drilling anything — you need to hit a structural beam or backing plate, not just the interior laminate, or the mount will pull loose.
- If you want zero permanent modification, RAM’s no-drill hardware (using seat bolts or clamp-on rails) avoids touching the cab structure at all, at a higher price than RV-style wall mounts.
- Get a lockable mount if the TV rides with you while driving — an unlocked swing arm will swing and rattle on rough roads.
As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.