Best Pulley For Table Saw

Table saw 1
Image: Table saw 1 by Puddin Tain (BY-SA)

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

There is no universal table-saw pulley. A replacement has to match the shaft it mounts on (motor or arbor), the belt section, the original pulley diameter and the available clearance; changing diameter also changes blade speed. Measure the shaft and keyway with the saw unplugged, read the motor and saw manuals, and retain the manufacturer’s intended speed range. The general-purpose sheaves below are only candidates after those checks—not claimed direct replacements for any saw.

# Product Price Where to buy
1 USA Roller Chain AK25-5/8 Pulley $13–$20 Amazon
2 VXB AK25-5/8 Cast-Iron Pulley $50–$65 Amazon · eBay
3 VXB BK25-5/8 Cast-Iron Pulley $25–$35 Amazon
4 VXB AK3058 Cast-Iron Sheave $50–$65 Amazon
5 VXB 3-inch 5/8-inch-Bore Motor Pulley $45–$55 Amazon
6 VXB Fixed-Bore 2.50-inch A/AX Pulley $20–$30 Amazon
7 Rubber Belts Online 2AK25-5/8 $35–$45 Amazon
8 Burr King 725 V-Belt Pulley $20–$40 Amazon
9 AK30-5/8 Cast-Iron Sheave $40–$65 Amazon · eBay

The picks, in detail

USA Roller Chain AK25-5/8 Pulley
Pick 01 of 09

USA Roller Chain AK25-5/8 Pulley

General-sheave near-miss: a 2.50-inch, 5/8-inch-bore A-belt pulley; use only if those measurements match the motor or arbor drive.

  • 2.50-inch diameter
  • 5/8-inch bore
  • A-belt section
Pros

  • Published dimensions
  • grade-35 cast iron
Cons

  • Not saw-specific
  • verify keyway and speed
Price: $13–$20
VXB AK25-5/8 Cast-Iron Pulley
Pick 02 of 09

VXB AK25-5/8 Cast-Iron Pulley

General-sheave near-miss with one groove, 2.5-inch OD and 5/8-inch bore; its listed keyway is 1/4 by 1/8 inch.

  • 2.5-inch OD
  • 5/8-inch bore
  • one groove
Pros

  • keyway listed
  • set screws included
Cons

  • not a direct saw part
  • belt section must match
VXB BK25-5/8 Cast-Iron Pulley
Pick 03 of 09

VXB BK25-5/8 Cast-Iron Pulley

General-sheave near-miss: single-groove 2.5-inch pulley for 4L/5L belts, with a 5/8-inch bore, keyway and hex set screws.

  • 2.5-inch OD
  • 4L/5L groove
  • 5/8-inch bore
Pros

  • set screws
  • cast iron
Cons

  • not for every belt profile
  • confirm shaft role
Price: $25–$35
VXB AK3058 Cast-Iron Sheave
Pick 04 of 09

VXB AK3058 Cast-Iron Sheave

General-sheave near-miss: one-groove 3-inch OD, 5/8-inch-bore cast-iron sheave for 3L, 4L or 5L belts, with keyway and set screw.

  • 3-inch OD
  • 5/8-inch bore
  • 3L/4L/5L
Pros

  • through-bore length published
  • keyway included
Cons

  • changes ratio versus 2.5-inch pulley
  • not saw-specific
Price: $50–$65
VXB 3-inch 5/8-inch-Bore Motor Pulley
Pick 05 of 09

VXB 3-inch 5/8-inch-Bore Motor Pulley

A one-groove cast-iron 3-inch pulley listed for A, 3L and 4L belts, with a 3/16 by 3/32-inch keyway and two screws.

  • 3-inch OD
  • 5/8-inch bore
  • 3/16 by 3/32 keyway
Pros

  • motor-pulley form
  • two screws listed
Cons

  • measure motor shaft
  • not for toothed belts
Price: $45–$55
VXB Fixed-Bore 2.50-inch A/AX Pulley
Pick 06 of 09

VXB Fixed-Bore 2.50-inch A/AX Pulley

General-sheave near-miss: fixed-bore, single-groove cast-iron pulley with 5/8-inch bore for A/AX, 3L and 4L belts.

  • 2.50-inch OD
  • fixed 5/8-inch bore
  • A/AX groove
Pros

  • broad listed belt compatibility
  • cast iron
Cons

  • no universal arbor fit
  • inspect original ratio
Price: $20–$30
Rubber Belts Online 2AK25-5/8
Pick 07 of 09

Rubber Belts Online 2AK25-5/8

General-sheave near-miss with two grooves rather than the usual single belt: 2.5-inch OD, 5/8-inch bore, 1/4 by 1/8 keyway and two set screws.

  • two grooves
  • 2.5-inch OD
  • 5/8-inch bore
Pros

  • keyway specified
  • set screws specified
Cons

  • two-groove design may not clear
  • not a saw OEM pulley
Price: $35–$45
Burr King 725 V-Belt Pulley
Pick 08 of 09

Burr King 725 V-Belt Pulley

General-sheave near-miss: a 2.5-inch-OD, 5/8-inch-ID V-belt pulley. Confirm its groove, hub offset and retention details before considering it.

  • 2.5-inch OD
  • 5/8-inch ID
  • V-belt pulley
Pros

  • simple published size
  • industrial supplier
Cons

  • full fitment must be checked
  • not saw-specific
Price: $20–$40
AK30-5/8 Cast-Iron Sheave
Pick 09 of 09

AK30-5/8 Cast-Iron Sheave

General-sheave near-miss: a 3-inch OD, 5/8-inch-bore single sheave with hex set screw and keyway for 3L/4L/5L belts.

  • 3-inch OD
  • single groove
  • cast iron
Pros

  • set screw
  • keyway
Cons

  • speed ratio changes
  • verify motor versus arbor shaft

Buying tips

  • Photograph and measure the original pulley, shaft, keyway, belt and hub offset before ordering.
  • Do not substitute a motor pulley for an arbor pulley simply because the bore matches.
  • Keep guards in place and do not exceed the saw, motor, belt or pulley speed rating.

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

Latest Posts