Best Mirrors for CO₂ Laser Cutter

Illustration for mirrors for co2 laser cutter
Illustration
9 picks compared
About this guide

A CO₂ mirror is not a generic upgrade: diameter, thickness, substrate, coating, wavelength and the mirror mount all have to agree. This list concentrates on actual 20 mm × 3 mm replacement products—the common size must still be measured on the removed part and mount. Never run an open or misaligned laser path; power down, follow the machine manual, use the correct laser-safety controls and have a qualified technician handle uncertain alignment.

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

The picks, in detail

LightObject LSR-MIR20MO 20 mm Molybdenum Mirror

A 20 mm molybdenum reflection mirror marketed for 60–100 W CO₂ lasers.

  • 20 mm diameter
  • molybdenum substrate
  • 60–100 W stated use
  • Named SKU
  • Current $15 listing
  • Confirm thickness at seller
  • Lower reflectivity than premium coated optics

EMP Laser 20 mm Si Reflective Mirror

EMP’s 20 mm × 3 mm gold-film silicon mirror is specified for 10.6 µm CO₂ use and 60–300 W, including Aeon MIRA 5, 7 and 9 mirror-three positions.

  • 20 mm diameter
  • 3 mm thickness
  • gold-plated silicon
  • Named machine compatibility
  • Current $39 listing
  • Machine-specific fit claim
  • Handle coating carefully

Cloudray CO₂ Si Reflective Mirror, 20 mm × 3 mm

A Cloudray silicon mirror variant with a gold single-side or black double-side polished option; select the 20 mm and 3 mm variant explicitly.

  • 20 mm option
  • 3 mm option
  • silicon substrate
  • Coating choices stated
  • Variant selection is essential
  • Not a substitute for mount measurement

Faomic Mo CO₂ Mirror 20 mm × 3 mm

A polished, uncoated molybdenum mirror specified as 20 mm diameter and 3 mm thick for CO₂ cutting and engraving machines.

$337.25 sale priceCheck price on Amazon
  • 20 mm diameter
  • 3 mm thickness
  • uncoated molybdenum
  • Exact dimensions published
  • Hard metal surface
  • Listed in a non-US market
  • Uncoated construction

Gravierbedarf SP20MO Molybdenum Mirror

The SP20MO is a 20 mm diameter, 3 mm high molybdenum CO₂ mirror; its supplier notes a lower reflection rate but harsh-environment suitability.

  • 20 mm diameter
  • 3 mm thickness
  • molybdenum
  • Exact SKU
  • Published supplier price
  • Reported unavailable
  • Lower-reflection substrate

Plexishop Silicon Gold-Coated 20 mm Mirror

A silicon, gold-coated CO₂ mirror listed at 20 mm diameter, 3 mm thickness and 10.6 µm wavelength.

  • 20 mm diameter
  • 3 mm thickness
  • gold-coated silicon
  • Exact CO₂ wavelength
  • Exact dimensions
  • International supplier
  • Protect coated face from fingerprints

Plexishop Molybdenum 20 mm Mirror

A separate Plexishop molybdenum mirror listing specifies a 20 mm diameter and 3 mm thickness for CO₂ laser service.

  • 20 mm diameter
  • 3 mm thickness
  • molybdenum
  • Separate substrate choice
  • Exact dimensions
  • International supplier
  • Confirm stock and price

Daisy Designs 20 mm Molybdenum Mirror 3-Pack

A three-pack of 20 mm molybdenum mirrors described for 10.6 µm / 10,600 nm CO₂ laser use.

  • 20 mm diameter
  • 3-pack
  • 10.6 µm stated wavelength
  • Spare set
  • CO₂ wavelength stated
  • Confirm thickness before purchase
  • Molybdenum optical trade-off

TEN-HIGH 20 mm Molybdenum Mirror 3-Pack

TEN-HIGH sells a three-piece 20 mm molybdenum mirror set for CO₂ engraving and cutting machines.

  • 20 mm diameter
  • 3 pieces
  • molybdenum
  • Three replacement mirrors
  • Named maker
  • Confirm thickness with listing
  • Check machine mount first
Price map

What each one costs

Typical price, cheapest first. Tap a name to jump to that pick and its buy link.

Side by side

Compare any three

LightObject LSR-MIR20MO 20 mm Molybdenum MirrorEMP Laser 20 mm Si Reflective MirrorCloudray CO₂ Si Reflective Mirror, 20 mm × 3 mm
Price$15$39$24
Key features
  • 20 mm diameter
  • molybdenum substrate
  • 60–100 W stated use
  • 20 mm diameter
  • 3 mm thickness
  • gold-plated silicon
  • 20 mm option
  • 3 mm option
  • silicon substrate
Pros
  • Named SKU
  • Current $15 listing
  • Named machine compatibility
  • Current $39 listing
  • Coating choices stated
Cons
  • Confirm thickness at seller
  • Lower reflectivity than premium coated optics
  • Machine-specific fit claim
  • Handle coating carefully
  • Variant selection is essential
  • Not a substitute for mount measurement

Buying tips

  • Measure the old mirror with calipers: diameter and thickness must match the holder; 19.05 mm is not 20 mm.
  • Match a coating/substrate to the machine’s specified 10.6 µm CO₂ optical path; do not use a visible-light mirror.
  • Wear clean gloves or finger cots, avoid touching the optical face and follow the manufacturer’s alignment procedure with the laser made safe.

As an Amazon Associate and eBay Partner, toptenpick.com earns from qualifying purchases. Prices and availability are subject to change.

Latest Posts